How to fix error 5200 (Canon IP 2770)

There is no doubts that Canon Printers still are favorites and is used everywhere. Low price is a factor for that. Print quality is not bad, and you can refill the cartridge using many refill ink available out there.

Canon ip2770

Canon iP2770 is one of them. This printer; however have an issue, which known as error 5200. This error usually appears after refilling the cartridge’s ink. Not by replacing the cartridge but by injecting ink into cartridge using syringe. Nothing weird happen, when you turn on the printer. Nevertheless, the symptom starting to show when you try to print, error 5200 will be shown. The next thing you know the green and orange light blink like crazy.

You can fix it by following these steps.

1. While connected to electricity, turn off the printer by pressing power button.
2. Press Resume button twice, then press power button until the green light is on (keep on pressing resume button while you start pressing power button)
3. Remove your finger from resume button but do not release the power button yet.
4. Press resume button 5 times, while still pressing power button until the green and orange light blink.
5. Release both buttons at the same time.
6. Printer’s leds will blink for a while then it should show green light.
7. Your computer will detect a new hardware, just ignore it.
8. Push power button to turn off the printer, and then turn it on again. Your iP2770 is ready to print.